Baumer Hubner HOG 10 G
|Square-wave cycles per turn:||1 - 2,500||Hollow shaft with clamping element up to d= 20 mm|
|Max. output frequency:||120 kHz|
|Logic level:||HTL, TTL, TTL (R)||Option: Cone shaft 1:10|
|Permissible encoder temperature:||-40 °C to +100 °C
-50 °C to +100 °C (optional)
|High HTL output current|
|Connection:||Large terminal box||Protection against shaft currents|
|Weight:||approx. 2.2 kg|
|Shock resistance (6 ms):||2,000 m/s²|
|Protection class:||IP 66||Ex II 3G 3D|
Baumer Hübner HeavyDuty incremental encoders are characterized by the following excellent features:
- Robust construction with solid light alloy housing for high vibration and shock proof protection.
- Bearings at both ends of the shaft, where construction permits.
- Short-circuit proof power transistors with peak currents up to 300 mA for line driving over long cables with HTL-signals or optional TTL-signals to RS-422.
- High Electromagnetic Compatibility (EMC), tested to IEC 801-4.
- Protection against shaft currents due to insulated ball bearings, in some devices.
- Incremental encoders without bearings for drives with large axial play or high speeds.
- Through-hole hollow shaft, also available in Sinus-Technology and in explosion proof execution "II 2 G EEx de IIC T6".
- Wide range of program with standard EURO-Flange B10.
- Rear shaft option for mounting of other devices.
- Combinations with common shaft:
- Incremental encoder + Incremental encoder (Twin Tacho),
- Incremental encoder + Analog-Tacho,
- Incremental encoder + Speed Switch.